Melange Clear Coat - Clear Coat for Furniture

APPLICATION INSTRUCTIONS:
Sand all surfaces (finished or unfinished) in the direction of the wood grain to desired smoothness.

Remove all dust from sanded surfaces and clean with a tack cloth.

Do not shake or thin.

Do not apply in direct sunlight or in temperatures below 55°F (10°C) or above 90°F (32°C).

Stir thoroughly prior to and during use.

Using a high-quality nylon/polyester bristle brush, dip approximately an inch into the can, gently tapping it against the inside to remove any excess.

Apply a thin, even coat following the direction of the grain making sure to maintain a wet edge.

For maximum durability, 3 coats are required.

Do not puddle, over-brush or overlap finishes.

Sand lightly between coats with fine sandpaper.

Remove all dust prior to applying additional coats.

Dries to touch in 1 hour.

Sand or Recoat: 1 hour.

After the final coat, allow 12 - 24 hours before light use.

Fully cured: 30 days.

Keep from extreme temps. Keep out of reach of children.